Autel MaxiCharger 80A 19.2kW Level 2 EV Charger
⚡ Before You Buy
The MaxiCharger 80A requires a dedicated 100-amp, 240V circuit — this is not a standard EV charger install. Most homes with 200-amp panels can support it, but a load calculation is essential before ordering. Homes with 100–150 amp service almost certainly cannot. A licensed electrician and permit are required. Do not order this charger without first confirming your panel can support a 100-amp dedicated circuit. Check the panel capacity guide →
The Autel MaxiCharger 80A is in a different category than standard residential EV chargers. At 19.2kW it delivers up to 70 miles of range per hour — meaning even a Cybertruck with a 123kWh battery goes from empty to full in under two hours. This is the right charger for buyers with large-battery EVs, households with two EVs, or anyone who wants to eliminate range anxiety from the equation entirely.
The 80A output requires a dedicated 100-amp circuit, which means this is a more significant electrical project than a standard 48A charger install. It's worth it for the right buyer — but only after confirming the panel can support it. Autel's AI-driven load management and one-click installation design make the actual charger setup simple once the circuit is in place. Works with all EVs via J1772; Tesla owners use the included adapter.
| Output Power | 19.2kW (80A @ 240V) |
| Amperage | 80A (requires 100A dedicated circuit) |
| Connector | J1772 — all non-Tesla EVs (Tesla via adapter) |
| Installation | Hardwired — licensed electrician required |
| Connectivity | Wi-Fi, Ethernet, Bluetooth, CAN, RS485 |
| Smart Features | AI load management, OCPP support, app control |
| Enclosure | NEMA 4X (indoor/outdoor) |
| Certifications | UL Listed, Energy Star, OCPP 1.6 |
Ships with:
- Autel MaxiCharger 80A unit
- J1772 charging cable
- Wall mounting hardware
What you'll need — this is not a standard install:
- Dedicated 100-amp, 240V circuit — requires heavier gauge wire (typically 2 AWG or larger) and a 100A breaker
- Licensed electrician — mandatory; this is a substantial electrical project
- 200-amp panel minimum — practically required; confirm with a load calculation
- Electrical permit — required in all jurisdictions for this size circuit
Typical installation cost for an 80A circuit: $800–$1,500+. Get quotes from at least two licensed electricians before committing.
Shipping: Free standard shipping to all 48 continental U.S. states. Typical transit 3–7 business days.
Returns: 30-day return window. Uninstalled, original condition only. Installed units cannot be returned. Contact support@chargeprodirect.com for warranty claims.
Do I really need 80A, or will 48A be enough?
For most single-EV households, 48A is plenty. 80A makes sense if you have a large-battery vehicle (Cybertruck, Rivian R1T/R1S, Hummer EV), two EVs sharing one charger, or you want the flexibility to charge both an EV and run other heavy loads simultaneously via load balancing.
What panel size do I need?
A 200-amp panel is practically required. The 80A charger draws 80A continuously — on a 200A panel, that's 40% of total capacity before accounting for any other loads. A load calculation is non-negotiable before this purchase.
What does OCPP support mean?
OCPP (Open Charge Point Protocol) allows this charger to integrate with commercial charging management systems. It's mainly relevant for multi-unit residential properties, commercial fleets, or smart home energy management platforms.
Will this work with Tesla?
Yes, using the Tesla J1772 adapter included with your vehicle.
Not sure this charger is right for your panel?
Answer 6 questions and get a personalized recommendation — the right amperage for your panel, home, and vehicles.
Build Your System →Shipping information
Free standard shipping on all orders to the contiguous 48 United States. Standard orders ship within 1–3 business days and arrive within 5–10 business days.
Large freight items (commercial chargers, battery systems, heavy equipment) ship within 7–14 business days. You will be contacted to schedule freight delivery.
Tracking information is provided via email once your order ships. We do not currently ship to Alaska or Hawaii.
Returns & warranty
We accept returns within 30 days of delivery. Items must be unused and in original packaging. A 25% restocking fee applies to all returns.
Inspect your order upon delivery. Report standard shipping damage within 48 hours and freight damage within 24 hours with photos to support@chargeprodirect.com.
Manufacturer warranties apply to all products — coverage varies by brand. Contact us at support@chargeprodirect.com or (781) 604-8685 to initiate a return or warranty claim.
